Solid Oak Tapered Plugs
- Solid Oak Plugs
- Sold in blocks of 4
- Plug Dimensions:
- 3/8″ – 11mm tapering down to 8.5mm
- 1/2″ – 13.5mm tapering down to 11.5mm
- 5/8″ – 17mm tapering down to 14.5mm
- 3/4″ – 20mm tapering down to 17.5mm
- 1″ – 26.5mm tapering down to 24.5mm
- 1 1/4″ – 32.5mm tapering down 30.5mm
- 1 1/2″ – 39mm tapering down to 37mm
Solid Oak Plugs can be used to conceal screw fixings. Particularly suitable for use with our oak decking, skirting and architrave.
Oak is a dense & durable slow grown hardwood.
Our oak boards can vary in colour from a very light brown through to a medium honey, giving a light, natural appearing deck that will blend sympathetically with most surroundings.
All exterior Oak will develop surface splits, shakes and cracks over time – this is a natural occurrence and these can even close back up again with the changing seasons.
Our Oak is a mixture of Rustic to Prime grade, allowing for cat paw, small, medium and large knots.
Some boards may contain sap and surface splits however this is structurally sound and within grade.
Board Lengths: whilst stock levels vary, our oak boards are generally available in lengths of 3m and 3.5m. Please contact us with any specific requirements you may have.
Our oak boards are planed smooth with eased long edges on both sides.
Comes unfinished and ready for oil if desired.
Any boards that are cut, should have a bees wax or end grain sealer applied to the freshly trimmed ends.
To ensure a firm hold, stainless steel decking screws should be used to install oak decking.